Name: GJD GJD392 R D-TECT X 4-Channel Receiver
Brand: GJD
SKU: GJD392

GJD GJD392 R D-TECT X 4-kanals modtager

Brand: GJD

ADI #:GJD392 Model #: GJD392 Name: GJD GJD392 R D-TECT X 4-Channel Receiver

Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a 'RF Loss' LED switches on and the contact is activated at the receiver

Produktoversigt

General Information

null

Vigtigste funktioner

Kodegenkendelsesprogrammering af hver detektor er både hurtig og enkel via et stik mellem detektor og modtager.

Som en systemkontrol udsender hver af de op til 16 detektorer automatisk et signal hvert 2. eller 15. minut for at bekræfte, at de er aktive. Hvis der ikke modtages et retursignal fra en registreret og genkendt detektor, tændes en 'RF Loss'-LED, og kontakten aktiveres på modtageren.

Information

Category : Centraler og betjeningspaneler, Trådløse modtagere, Produkter, Tyverisikring

Specifikationer

Generel information

ADI Part Number

GJD392

Mærke

GJD

Producent

GJD Manufacturing

Producentens varenummer

GJD392

Produktmodel

GJD392

Produktnavn

D-TECT X Receiver - GJD392 500m Wireless Receiver

Produkttype

Security Wireless Receiver

Vægt (ca.) (g)

658

Fysiske egenskaber

Applikations/brug

Motion Detector

Bredde

180 mm

Bredde (mm)

180

Dybde

210 mm

Dybde (mm)

210

Højde

75 mm

Højde (mm)

Materiale detaljer

Polycarbonate - Case

Produkt Materiel

Polycarbonate

Vægt (ca.)

658 g

Diverse

Funktioner

An RF continuity test mode facility tests the strength of the RF signal from each detector at the receiver location. When it is necessary to conduct a site survey prior to installation, the receiver can be powered temporarily with a PP3 9 V battery, Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver, The D-TECT X receiver is powered by a 12 - 24V AC/DC supply, The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500 metres in line of sight to the detectors

Indendørs/udendørs

indoor, Outdoor

Kompatibilitet

GJD D-TECT X Ranges of Wireless Detectors